Drag S Pod Mod 60W Kit

$40.99$46.00 (-11%)

In stock

Compare
Category:

Voopoo Drag S Pod Mod 60W Kit
Voopoo Drag S fires from 5-60W but unlike the Drag X features an integrated 2500mAh battery. The durable zinc alloy and leather construction of the mod help maxmize protection and minimise fingerprints.

The Drag S uses the performance focused GENE.TT chipset which intelligently recognises coil resistance and won’t let you exceed recommend wattage. Fast firing it will fire in just 0.001s and also includes Puff records and the new Score Ranking. Here you can rank up and work your way through the levels from Iron to King.

Another neat feature of the Drag S is the 3 firing modes. P is for manual firing, P+A is where you can use the firing key and draw activation, and an RBA mode for when you have the PnP RBA coil installed.

One the top of the mod is the infinite airflow, easily adjusted using the sliding switch. One of the reasons this is an important and cool feature is that Voopoo will be bringing out a 510 adaptor so that you can fit any tank up top.

However the beauty of the Voopoo Drag S is the 4.5mL pod, which is more than a just a pod. Firstly the pod is totally transparent and the whole of the vape juice chamber is visible, so you can easily keep track of your levels. The replaceable PnP coils can be easily removed and replaced in Voopoo’s distinctive plug and play style. Drag S is compatible with the whole PnP coil range, which includes an RBA if you like rebuildables. The pod is held neatly in place buy strong magnets and thanks to the circular design is very easy to install. The only downside is the bottom fill mechanism which can lead to leaking. Just make sure to double check the stopper is firmly in place.

In the Drag S kit you get two coils, the 0.2 Ohm PnP-VM5 and the 0.3 Ohm PnP-VM1. Figure out which you prefer or check out some of the other replacement Voopoo PnP coil options.

You get to choose from a range of funky named colors, listed below in the spec and 7 protection features. These include:

Overtime
Short-Circuit
Overcharge
Max Power
Output Overcurrent
Over Discharge
Over Temperature
Battery Reverse
Full Voopoo PnP Coil Range:

PnP-VM5
Resistance:0.2Ω
Range:40~60W
Type:Mesh Coil

PnP-VM6
DL
Resistance:0.15Ω
Range:60~80W
Type:Mesh Coil

PnP-VM1
DL
Resistance:0.3Ω
Range:32~40W
Type:Single Mesh

PnP-VM4
Half-DL
Resistance:0.6Ω
Range:20-28W
Type:Single Mesh

PnP-VM3
Half-DL
Resistance:0.45Ω
Range:25~35W
Type:Single Mesh

PnP-R1
MTL
Resistance:0.8Ω
Range:12-18W
Type:Regular Coils

PnP-R2
MTL
Resistance:1Ω
Range:10-15W
Type:Regular Coils

PnP-RBA
MTL/Half-DL
Resistance:DIY

PnP-M2
Half-DL
Resistance:0.6Ω
Range:20-28W
Type:Single Mesh
Voopoo Drag S Pod Mod Kit Specification:
Dimensions: 87 (h) x 33 (w) x 28mm (d)
Battery: 2500mAh Integrated Battery
Material: Alloy, Leather (Mod), PCTG (Pod)
Output Power: 5-60W
Output Voltage: 3.2~4.2V
Resistance: 0.1~3.0Ω
Capacity: 4.5ml
Coils:
0.2ohm PnP-VM5 Coil (40-60W)
0.3ohm PnP-VM1 Coil (60-80W)
Compatible with all PnP coils including RBA
Fill: Bottom Fill
Charging: 5V/2A
Charging Port: Type-C
Protection Featured:
Overtime
Short-circuit
Overcharge
Max Power
Output Over-current
Over-Discharge
Over-temperature Protection
Colors: Classics, Carbon Fiber, Retro, Mashup, Chestnut, Marsala, Galaxy Blue
VOOPOO Drag S Mod Pod Kit 60W Kit Includes:
1x DRAG S Device
1x DRAG S Replacement Pod (4.5mL)
1x PnP-VM1 – 0.3 Ohm
1x PnP-VM5 – 0.2 Ohm
1x Type-C Cable
1x User Manual
1x Warranty Card
1x Chip Card

Only logged in customers who have purchased this product may leave a review.

Reviews

There are no reviews yet.

Main Menu

Drag S Pod Mod 60W Kit

$40.99$46.00 (-11%)

Add to Cart